RODE VideoMic Pro R with Rycote Lyre Shockmount

click on image to enlarge

    RODE VideoMic Pro R with Rycote Lyre Shockmount

    Availability 1

    Jigsaw Code: G532AAI
    Manufacturer Code: RodeVideoMic pro-r

    • Frequency Range: 40Hz to 20kHzkHz
    • Low Frequency Roll-Off

    Platform:  general general

    Availability:  1

    £145.00£174.00 incVAT

    Select a quantity
    Add to bag
    Added to bag. View bag
    Send to a friend

    more info


    The RODE VideoMic Pro is a true shotgun microphone designed for use with camcorders, DSLR cameras and portable audio recorders as a source of primary and reference audio. It builds on the success of the original VideoMic Pro by having a Rycote Lyre shock mount for improved mechanical vibration rejection.

    At the heart of the VideoMic Pro R is an all-new 1/2" condenser capsule that provides broadcast-quality audio via a 3.5mm minijack connector (outputting the mono signal to both left and right channels). A super-cardioid polar pattern ensures that surrounding audio is minimised, and your recording is focused on the subject in front of the camera.

    Easily accessible on the rear face of the microphone are the power, filter and level controls. In addition to the microphone's native 40Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.

    Below these controls are the level settings, which attenuate or boost the recorded level as required. The -10dB level attenuation (or PAD) is ideal for recording loud sound sources, such as live music, motorsport, or interviews where the subject is very close to the camera. The +20dB level boost is designed for use with DSLR cameras, allowing the user to reduce the camera's preamp level (or mic-input level), effectively reducing the amount of noise generated by the camera's comparatively low quality audio circuitry.

    The microphone uses a standard sized shoe mount for on camera use, and features a 3/8" thread in the base of the mount for easy boom pole mounting. The VideoMic Pro R is battery powered, and provides over 70 hours recording from a single 9V battery. The RODE VideoMic is designed and made in Australia, and covered by RODE Microphones' industry leading 10 year warranty.


    Open all

    General Specifications

    Microphone Type
    Included Shockmount
    Frequency Range
    40Hz to 20kHzkHz
    Maximum Input Sound Level (SPL)
    134dB SPL @ 1kHz
    Low Frequency Roll-Off
    Power Requirements
    9V alkaline battery (current 7.8mA)

    Polar Pattern

    Figure 8
    Super Cardioid
    Continuously Variable


    Output Impedance (Ohms)
    Output Connectors
    Locking 1/8 inch Minijack

    Weight & Dimensions

    Weight (kg)
    H 3.74 inch W 1.69 inch D 6 inch


    10 Year Limited Warranty

    What's in the Box

    Videomic Pro
    Load more
    back to top

    Solutions & services