The BM6A from Dynaudio Acoustics is a two-way active studio monitor designed for nearfield applications. Powered by twin 100W amplifiers, the BM6A features a 7" woofer and a 1" dome tweeter contained within a black and aluminum cabinet.
The cabinet interior features damping material to minimise, vibration-related distortion, and the fluid-protected tweeter features a rear acoustic chamber. The amps are convection cooled, and there are a pair of front panel LEDs indicating power, and overdrive or thermal protection activity. At the rear, you will find high and low frequency controls and a balanced/unbalanced level sensitivity switch. The rear XLR port give connectivity to virtually any professional sound system.
Monitor Specifications
| | |
|---|
| Speaker Type | Active |
| Low Frequency Driver | 7" (178mm) Molded Polypropylene Cone Woofer with 3" Aluminum Voice Coil |
| High Frequency Driver | 1" (25mm) Esotec Soft Dome Tweeter with Rear Chamber, Magnetic Fluid, Die-Cast Aluminum Front, and 4mm Aluminum Voice Coil |
| LF | 100W |
| HF | 100W |
| Crossover | Electronic, 24dB/Octave Slope, 2.2kHz, 4th Order Phase Aligned |
| Frequency Range | 41H - 21kHz |
| Maximum Sound Pressure Level (SPL) | 118dB @ 1m |
| Shielded | Yes |
| | |
|---|
| Phono | No |
| TRS Jack | No |
| XLR | Yes |
| Volume | Yes |
| On/Off | Yes |
| Voltage Selector | No |
| High-Frequency Control | Yes |
| Mid-Frequency Control | No |
| Low-Frequency Control | Yes |
| Acoustic Selector Switch | No |
| | |
|---|
| Dimensions | H 13.3"
W 8.5"
D 12.6" |
| Weight (kg) | 11 |
| | |
|---|
Power Cable
Owner's Manual | |
