The BM6A from Dynaudio Acoustics is a two-way active studio nearfield monitor. This exclusive Jigsaw bundle also includes a set for Auralex Mopads which help isolate studio speakers and help get the best possible sound to your ears.
The Dynaudio BM6As are powered by twin 100W amplifiers, the BM6A features a 7" woofer and a 1" dome tweeter contained within a black and aluminium cabinet.
The cabinet interior features damping material to minimise, vibration-related distortion, and the fluid-protected tweeter features a rear acoustic chamber. The amps are convection cooled, and there are a pair of front panel LEDs indicating power, and overdrive or thermal protection activity. At the rear, you will find high and low frequency controls and a balanced/unbalanced level sensitivity switch. The rear XLR port give connectivity to virtually any professional sound system.
Monitor Specifications
| | |
|---|
| Speaker Type | Active |
| Low Frequency Driver | 7" (178mm) Molded Polypropylene Cone Woofer with 3" Aluminum Voice Coil |
| High Frequency Driver | 1" (25mm) Esotec Soft Dome Tweeter with Rear Chamber, Magnetic Fluid, Die-Cast Aluminum Front, and 4mm Aluminum Voice Coil |
| LF | 100W |
| HF | 100W |
| Crossover | Electronic, 24dB/Octave Slope, 2.2kHz, 4th Order Phase Aligned |
| Frequency Range | 41H - 21kHz |
| Maximum Sound Pressure Level (SPL) | 118dB @ 1m |
| Shielded | Yes |
| | |
|---|
| Phono | No |
| TRS Jack | No |
| XLR | Yes |
| Volume | Yes |
| On/Off | Yes |
| Voltage Selector | No |
| High-Frequency Control | Yes |
| Mid-Frequency Control | No |
| Low-Frequency Control | Yes |
| Acoustic Selector Switch | No |
| | |
|---|
| Dimensions | H 13.3"
W 8.5"
D 12.6" |
| Weight (kg) | 11 |
| | |
|---|
Power Cable
Owner's Manual | |
