The RODE Stereo VideoMic Pro is perfectly suited to DSLR, consumer camcorders and large-sensor video cameras. The integrated shock mounting system provides superior isolation from vibration and mechanical noise that can otherwise degrade the recording quality. Additionally the lightweight yet robust multi-strand cable provides excellent acoustic decoupling from the camera and offers significantly lower noise transference than traditional audio cable.
The user friendly designed rear of the microphone body features the power and equalisation controls, including a high pass filter at 75Hz which is designed to cut out the noise generated by air conditioning, traffic and other undesirable low frequency interference.
A -10dB PAD allows the user to reduce the sensitivity of the microphone, making it suitable for recording loud sound sources such as live music or at sporting events.
Like the VideoMic Pro, the Stereo VideoMic Pro features a +20dB level boost specifically designed to provide a higher quality signal with DSLR cameras. When activated, the typically low quality camera preamp level can be reduced, resulting in a lower noise floor and much clearer recording.
General Specifications
| | |
|---|
| Microphone Type | Stereo Condenser |
| Wireless | No |
| USB | No |
| Headphone Monitoring | No |
| Included Shockmount | Yes |
| Frequency Range | 40Hz to 20kHzkHz |
| Signal-to-Noise Ratio | -38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Maximum Input Sound Level (SPL) | 134dB SPL (@ 1kHz, 1% THD into 1K ohms load) |
| Low Frequency Roll-Off | No |
| Pad | No |
| Power Requirements | 9V battery |
| | |
|---|
| Output Impedance (Ohms) | 200 |
| Output Connectors | 3.5mm |
| | |
|---|
| Weight (kg) | 0.24 |
| Dimensions | H 130mm
W 66mm
D 108mm |
