Sony’s PMW range get v1.20 firmware update

Sony have released a free firmware update for the PMW-100, PMW-150 and PMW-200, adding i.LINK DVCAM input and improving Auto Focus, Auto Knee and ATW, among other things. The full list of changes follows, courtesy of Sony. 

New features for your PMW-100


1.) i.LINK DVCAM Input – 
Stream signal recording via i.LINK DVCAM input is available

2.) TLCS Operation
 – The range of selectable items has been expanded to improve TLCS operation. The default value of AGC Limit has changed from 12 to 9. The setting values of AGC Point have changed from E98, E95, E92 to E98, E95, E92, E77 and the default value has changed from E98 to E77. The A.SHT Point value cannot be larger than the AGC Point value. The default value has changed from E87 to E77

3.) Selecting AUDIO IN Reference Input Level
 – The default value of Audio Input has changed from -40 dB to -60 dB

4.) Auto Focus
 – Auto focus performance is improved. Focus instability near the focal point and with a high-luminance background has been reduced


5.) Auto Knee
 – Emphasis of white for an object with a high-luminance background has been reduced

6.) ATW – 
ATW performance is improved. When ATW mode is set to Natural, automatic adjustment for wider brightness range when shooting outdoors is available.

New features for your PMW-150

 


1.) i.LINK DVCAM Input
 – Stream signal recording via i.LINK DVCAM input is available.

2.) Adjusting the Brightness of the EVF Screen – 
The default value of EVF has changed from ±0 to +30

3.) Selecting AUDIO IN Reference Input Level
 – The default value of Audio Input has changed from -40 dB to -60 dB


4.) External Device Connector
 – A message will be displayed if a USB device which is not supported by this unit has been connected


5.) Auto Focus
 – Auto focus performance is improved. Focus instability near the focal point and with a high-luminance background has been reduced


6.) Auto Knee – 
Auto Knee performance is improved. Emphasis of white for an object with a high-luminance background has been reduced


7.) ATW – 
ATW performance is improved. When ATW mode is set to Natural, automatic adjustment for wider brightness range when shooting outdoors is available


8.) Matrix Adjustment – 
Can be put on OFF in PICTURE PROFILE SET.

New features for your PMW-200

 

Auto flange back adjustment must be performed after installing this software. Refer to Auto Flange Back Adjustment Guide + Chart for details.

1.) i.LINK DVCAM Input
 – Stream signal recording via i.LINK DVCAM input is available


2.) Adjusting the Brightness of the EVF Screen
 – The default value of EVF has changed from ±0 to +30


3.) Selecting AUDIO IN Reference Input Level
 – The default value of Audio Input has changed from -40 dB to -60 dB


4.) External Device Connector
 – A message will be displayed if a USB device which is not supported by this unit has been connected


5.) Auto Focus
 – Auto focus performance is improved. Focus instability near the focal point and with a high-luminance background has been reduced


6.) Auto Knee
 – Auto Knee performance is improved. Emphasis of white for an object with a high-luminance background has been reduced


7.) ATW
 – ATW performance is improved. When ATW mode is set to Natural, automatic adjustment for wider brightness range when shooting outdoors is available


8.) Matrix Adjustment – 
Can be put on OFF in PICTURE PROFILE SET
Want to know more? Give us a call on 03332 409 306 or email broadcast@Jigsaw24.com. For all the latest news, follow @Jigsaw24Video on Twitter or ‘Like’ us on Facebook

Liz
Liz
Call us: 03332 409 306

Leave a Reply

Your email address will not be published. Required fields are marked *