Manufacturing issues delay Blackmagic Design Cinema Camera

Wondering where your Blackmagic Design Cinema Camera‘s got to? Well, according to a statement from CEO Grant Petty, manufacturing delays mean we probably won’t be seeing any new models ’til the new year (though in happier news, there’s already a firmware update).

Blackmagic Design Cinema Camera shooting

What happened?

You can read Petty’s statement in full below, but the gist is that due to a fault at their glass supplier’s, most of the Cinema Cameras Blackmagic Design have made so far have blemishes on the sensor.

Now, if you’re one of the lucky few who got a demo unit to review or shoot test footage on, don’t worry – the fault doesn’t affect any cameras that have already shipped. It’s only present in the batch that they’re making for general release, but unfortunately the problem is so widespread that they’re essentially having to start their production run from scratch, meaning that no-one is likely to receive stock any time soon.

We’re still going to be the first in the UK to get Cinema Cameras in stock, though, and we’ll let you know when they’re likely to arrive as soon as we know more.

Grant Petty’s statement

(Taken from the Blackmagic Design forum.)

Hi,
I wanted to give everyone an update on where we are with Blackmagic Cinema Camera shipments.

As you know, we have been dealing with a supplier delay which has stalled our ability to build cameras. I thought it might be a good idea to explain in more detail what is going on, and do a technical “brain dump” on the problem so everyone understands the nature of the delay and what we have been doing about it.

Over a month ago now, we completed the testing of the Blackmagic Cinema Camera and started production. Very quickly we started to see cameras failing our production testing as they suffered from blemishes on the sensor. These are high end cameras so need to be built to a very high specification.

We started testing to discover the cause of the problem and discovered that the problems were from our second shipment of sensors. The first shipment of sensors were fine. All the cameras you currently see people using had been built from this first batch of sensors and that is why we did not see any issues until we started to build cameras in volume.

While investigating the problem our engineers found the blemishes were in the glass that covers the sensor, and not the sensor itself. This is good because the glass might just be dirty so we saw this as a quick fix, but wondered how a supplier could deliver us sensors that had blemishes, as they are supposed to pre test them.

It is worth noting here what this glass does. Each sensor has a glass cover to keep contamination off the surface of the sensor itself, which is essentially a large semiconductor. If the surface ever got dirty, it would be impossible to clean, however the glass is easy to clean. All sensors have this glass cover. It is a high quality glass with optical coatings, similar to lens glass.

Anyway getting back to the issue, when talking with the supplier, it turned out they had a bug in their test software that tested sensors after the glass had been applied. That’s why they shipped us bad sensors and did not notice. They fixed that problem and could then see the problems we saw and stopped production as about 95% of sensors were suffering this problem with the glass.

The next step for the supplier was for them to work out the cause of the blemishes on the glass. They developed tests for the glass before being bonded to the sensor, and discovered it contained the blemishes on the glass before being used in the suppliers factory. After more testing over the last few weeks, the supplier has discovered the blemishes are caused by a contamination from the packing materials used by the glass supplier to ship the glass to the sensor supplier.

So that’s where we are at now. The supplier is due to get more glass later this week and then hopes to start up production again using new clean glass that will result in good quality sensors that we can use to start building cameras again.

We build our cameras in our own factory on a production line built for the camera so we can start shipping cameras again the day we receive good sensors.

I deeply apologize for the delay in shipping and it has been very frustrating for us as well to be sitting on a completed and tested product for a month that we cannot sell. Especially when people need them urgently.

As you can also see from the breakdown of the problem above, there has been multiple stages of testing to discover the cause of the problem so it has been hard to lock down dates or what was going on until now, so its been hard to update everyone on the exact details.

I hope this update helps people understand the delay. We should know more details about shipping times once the new glass arrives at our supplier.
We also have a new software update v1.1 for the camera due in a few days. The original v1 software did not have DNxHD support so thats now been added, as well as support for lens stabilizers and a bunch of other small features.

Regards,
Grant Petty Blackmagic Design

Want to know more about the Blackmagic Design Cinema Camera? Give us a call on 03332 409 305 or email broadcast@Jigsaw24.com. For all the latest news, follow @Jigsaw24Video on Twitter or Like’ our Facebook page.

Liz
Liz
Call us: 03332 409 306

Leave a Reply

Your email address will not be published. Required fields are marked *