Neumann TLM107 Multi-Pattern Studio Condenser Microphone

click on image to enlarge

    Neumann TLM107 Multi-Pattern Studio Condenser Microphone

    Estimated 5-7 Days Delivery

    Jigsaw Code: G860AAG
    Manufacturer Code: 008667

    • Pad
    • Low Frequency Roll-Off
    • Frequency Range: 20 Hz - 20kHz kHz
    • Microphone Type: Condenser
    • Polar Pattern: Cardioid / Hypercardioid / Figure 8 / Omnidirectional / Super Cardioid

    Platform:  general general

    Availability:  Estimated 5-7 Days Delivery

    £815.00£978.00 incVAT

    Select a quantity
    Add to bag
    Added to bag. View bag
    Send to a friend

    more info

    Details

    Multi-faceted versatility, no-compromise sound and innovative operation: With five directional characteristics and a novel operating concept, this standard-setting large-diaphragm microphone provides sound without any coloration. Featuring equally impressive level stability and low self-noise, it captures everything from the softest whisper to thundering drums. For studio, broadcasting and demanding home recording applications.

    Classic proportions combined with attractive styling and fresh ideas - the TLM 107 perfectly embodies the Neumann philosophy: Innovation based on tradition. Far from evoking vintage or retro nostalgia, the standard-setting TLM 107 represents an impressive, modern studio microphone. Its extensive performance spectrum and high-precision reproduction, very close to the original, make the TLM 107 universally applicable, opening up previously unknown design freedom possibilities in mixing and post-production. Neumann Engineering

    The newly developed sound transducer, which was designed especially for this microphone, is impressive with its outstanding impulse fidelity. The great consistency of the five polar patterns, omnidirectional, cardioid and figure-8, with the intermediate patterns wide-angle cardioid and hypercardioid, is also unusual for a large-diaphragm capsule. The TLM 107 provides optimal sound not only for the cardioid setting; it also ensures maximum precision over the entire frequency range for all of the other directional characteristics. The sound always remains balanced, with an almost linear reproduction up to 8 kHz, and a slight boost in the highest frequencies that lends presence and freshness to the voice. Here particular attention has been paid to the natural reproduction of speech sounds, especially the critical "s" sound. The grille is acoustically optimized for low sensitivity to pop sounds. In addition, the sound transducer is edge-terminated, with both diaphragms at ground voltage. Specifically, this ensures considerably reduced sensitivity to dust and humidity.

    No-Compromise Sound Design Transformerless circuitry permits a high degree of linearity and a large dynamic range. The self-noise of only 10 dB-A is practically inaudible, while at the same time, the TLM 107 features high level stability. The maximum sound pressure level of 141 dB SPL can be increased to 153 dB SPL via pre-attenuation (Pad). This enables the TLM 107 to transmit the sound of even the loudest instruments without distortion. The Low Cut settings of Linear, 40 Hz, and 100 Hz are precisely adapted to practical recording situations. Without side effects, the 40 Hz setting cuts interference noise below the range of fundamental tones (where 41 Hz is the frequency of the double bass open E string), while the 100 Hz setting is optimized for speech and vocals (where 100 Hz corresponds to the lowest notes of a baritone).

    Innovative Operating Concept For the first time, all of the microphone switch functions are controlled intuitively via a navigation switch. A visual highlight is the illuminated pattern display in the chrome ring, while the Pad and Low Cut status is displayed by LEDs to the left and right of the switch. In order not to distract singers, the switch and display are located on the back of the microphone. After 15 seconds, the displays are turned off automatically.

    Delivery Package The TLM 107 is available in the colors matte nickel and black. A stand mount (SG 2) is included.

    Specifications

    Open all

    General Specifications

    Microphone Type
    Condenser
    Wireless
    No
    USB
    No
    Headphone Monitoring
    No
    Included Shockmount
    No
    Frequency Range
    20 Hz - 20kHz kHz
    Signal-to-Noise Ratio
    72dB
    Maximum Input Sound Level (SPL)
    141dB
    Low Frequency Roll-Off
    Yes
    Pad
    Yes
    Power Requirements
    48V Phantom Power

    Polar Pattern

    Polar Pattern
    Cardioid / Hypercardioid / Figure 8 / Omnidirectional / Super Cardioid

    Output

    Output Impedance (Ohms)
    50 Ohms
    Output Connectors
    XLR M

    Weight & Dimensions

    Weight (kg)
    445g
    Dimensions
    H 145mm W 64mm D 64mm

    Warranty

    1 Year Limited Warranty

    What's in the Box

    Wooden box SG2 Stand mount
    Load more
    back to top

    Solutions & services

    Resources

    Feedback Form